A contract fabricator for the metal and the wire-out behind switchgear, PDUs, controls and power distribution equipment — enclosures, panels, bus housings, cabinets and harnesses, built to your print on programs sized to your releases.
Request a QuoteSwitchgear, PDU, panelboard and controls OEMs are capacity-constrained on the electrical assembly side, not the sheet-metal side — yet many still run their own fab shops for enclosures, doors and panels because they haven't found a contract fabricator who understands the product. Every square foot and every welder spent on sheet metal is a square foot and a welder not spent on bus, breakers and testing.
FabTek fabricates the metal for switchgear and electrical OEMs at four plants in Hazlehurst, Mississippi: switchgear panels and components, complete switchgear enclosures, control cabinets, bus duct and bus bar housings, PDU/UPS cabinets and NEMA 3R / 4X outdoor enclosures — laser-cut, formed, welded, hardware installed and powder-coated in-house, at hundreds of units a month. Through our electrical assembly group, the enclosure can leave here with sub-panels, harnesses and terminal blocks installed and tested.
Doors, covers, barriers and kitted sheet metal for OEM lineups.
View →
Free-standing, walk-in and outdoor switchgear housings.
View →
Relay, RTU, SCADA and metering cabinets, single- and multi-bay.
View →
Enclosed bus assemblies, busway runs and tap boxes.
View →
Outdoor rainproof cabinets, housings and walk-ins.
View →
Harnesses, sub-assemblies and cabinet wire-out.
View →Blanket order against your forecast; monthly releases; revision-controlled drawings on our side; material to your spec with certs, or consigned; kitted per section and staged line-side; first-article inspection on every new part number. Our guide to running an OEM–fabricator program covers the mechanics, and the cost of a stalled line vs. reserved capacity covers why OEMs reserve a line rather than buy spot.
FabTek Industries fabricates enclosures, panels, doors, barriers, bus housings and cabinets for switchgear and electrical OEMs at production volume from Hazlehurst, Mississippi.
Yes — design authority stays with the OEM; we review for manufacturability and build to print.
Yes — sub-panels, harnesses and terminal blocks installed and tested by our electrical assembly group.
Program releases run to a reserved schedule; spot work averages 30–45 days. See dedicated production lines.
Send a drawing package and your monthly release volume — we'll quote the scope and propose a program.