Products
Bus Ducts & Busways
Metal housings, enclosed bus runs, and distribution assemblies for high-amperage power distribution — fabricated, welded, and finished entirely in-house.
Metal housings, enclosed bus runs, and distribution assemblies for high-amperage power distribution — fabricated, welded, and finished entirely in-house.
FabTek fabricates the metal housings, enclosed runs, and distribution assemblies that route high-amperage power — built to your drawings and finished in-house, including paint.
For utilities, transformer OEMs, EPC contractors, and data center builders, single-source fabrication means tighter tolerances, consistent finishes, and schedules you can plan around. Every assembly is a domestic build, produced under an ISO 9001:2015 quality system at our facilities in Hazlehurst, Mississippi.
Metal enclosures and housings for bus duct systems, fabricated, welded, and finished in-house.
Enclosed busway runs and straight, elbow, and transition sections built to your layout.
Distribution sections and tap-off housings fabricated to print for power distribution.
Send drawings or a spec — we fabricate to print, including welded and bolted assembly.
Bus ducts and busways move high-current power efficiently between the major components of an electrical system.
From transformers and switchgear to distribution panels and the dense power rooms inside modern data centers, FabTek fabricates datacenter-grade bus duct and busway enclosures that carry large loads in a compact, serviceable footprint. That capability matters most where hyperscale and AI data center demand is driving record grid investment — and wherever utilities, EPC contractors, and OEMs need reliable, high-amperage distribution in tight quarters.
| Materials | Aluminum, carbon steel, and stainless steel |
|---|---|
| Housing types | Non-segregated, segregated, and isolated-phase bus housings; cable-bus enclosures |
| Configurations | Straight runs, elbows, tees, offsets, and tap boxes |
| Finish | In-house powder coat, or plated / unpainted to spec |
| Welding | AWS-certified (GMAW / GTAW) |
| Ratings | Enclosures built to your electrical and mechanical specification |
| Quality & origin | ISO 9001:2015, OSHA-compliant, made in the U.S.A. |
| Engineering | Build-to-print and custom-spec |
Representative capabilities — exact ranges, ratings, and finishes are confirmed per project. Send drawings for a firm quote.
Each assembly moves through our own shop end to end — no outsourced steps, including paint. That's how we hold tolerances and finish quality at volume.
Fabrication runs through our laser cutting, CNC press-brake forming, robotic plasma cutting, welding, and powder-coat finishing — see our full equipment and capabilities for the machines behind each step.
Built at four production sites in Hazlehurst, Mississippi.
ISO 9001:2015 quality management, AWS-certified welding, OSHA-compliant facilities.
In-house powder-coat backed by an IEEE 2000-hour salt-spray certification.
25+ years of fabrication experience and the automation to grow with your volume.
Yes — build-to-print and custom-spec, with all work done in-house including welding, bolted assembly, and powder-coat paint.
We fabricate the metal housings, enclosures, enclosed runs, and supporting steel for bus duct and busway systems.
All assemblies are manufactured in the United States at our facilities in Hazlehurst, Mississippi.
Explore related lines: Switchgear enclosures · Transformer cabinets · Substation structures & support steel · See all products
Send drawings or a scope and we'll get you a real answer — typically within one business day.